While your new wooden floor may look great when you first install it, you could run into issues if you don’t leave sufficient expansion gaps. This can put pressure on your boards, lift the floor, and even cause bulges.
This is because your flooring expands.
Hardwood floor expansion gaps are extremely important to ensure your floor is installed correctly. Leaving small gaps around the edges of the room, doorways, and any fixed objects allows the wood to move as it naturally would.
Knowing where expansion gaps should be, how much space to leave and what happens in larger rooms will help homeowners avoid any unnecessary issues with their flooring.
Why Hardwood Flooring Needs Expansion Gaps
Wood naturally expands and contracts depending on moisture levels and humidity. Wood tends to expand when it takes in moisture and contract when it loses moisture.
No matter how properly your hardwood is acclimated, you will still see expansion and contraction occur over time.
In Colorado, we often see this due to humidity levels inside changing from season to season.
During the winter months, our heating can create very dry indoor conditions. This can cause your hardwood to contract, causing small gaps between the boards. As humidity increases, your boards can absorb moisture and expand.
By leaving expansion gaps, your flooring can expand without putting pressure on the nearby walls.
If you do not leave enough space for your boards to expand, you can cause pressure issues leading to your flooring buckling, warping or causing issues with your joints.
If you’d like to understand why your flooring will change throughout the seasons, please read our blog about how Colorado’s dry climate affects wood floors.
Where Should Hardwood Floor Expansion Gaps Be Left?
There are a few things to consider when installing your hardwood flooring and ensuring you leave expansion space.
Expansion Gaps Around Walls and Perimeters
The most common place to leave expansion gaps is between the flooring and walls.
When laying your first row of flooring, your installers will ensure they are leaving the correct amount of space between the boards and walls. This will also be done to the other edges.
This ensures your flooring isn’t tight against the structure of your property.
Typically, this gap will be covered by your skirtings or suitable trims.
You shouldn’t be able to see any gaps around your completed floor.
However, your trims need to be installed so they don’t cause any issues with expansion.
Expansion Gaps Around Fixed Objects
Not just walls can cause issues with your hardwood flooring expanding.
Fireplace hearths, pillars, stairs, door frames, and built-in cabinetry can cause issues.
When laying out your floor, you will need to consider these areas.
For example, if your flooring is tight to a stone fireplace, you may not have enough expansion space towards that edge. Or, around a pillar, your flooring should have the correct amount of space.
Depending on your floor system and what object you have, you will need to consider how you install.
Expansion Gaps at Doorways
Doorways can be tricky, as homeowners often want their flooring to flow seamlessly into the next room.
Whilst this can be achieved with some products and layouts, you need to ensure your flooring can move as intended.
Some engineered flooring requires expansion joints or transition profiles around doorways, especially if it’s a floating system. However, some products allow you to have seamless flooring within set room sizes.
Always follow the guidelines from your flooring manufacturer.
How Wide Should Hardwood Floor Expansion Gaps Be?
There is not one measurement you should follow for all hardwood floors.
Depending on your product, installation, room size, and manufacturer instructions, you will need to leave the correct amount of space.
Typical Expansion Gap Requirements
Some hardwood products will require 1/4″ to 1/2″ around the edges.
Other products will require different amounts.
Some solid hardwood installations may require more space, depending on the board thickness or how they are installed.
These are just examples.
Always check the installation instructions for your hardwood flooring to ensure you are leaving the correct amount of space.
Installers will also need to consider if they are installing solid hardwood, engineered planks or a floating system.
Why Flooring Type Matters
Solid hardwood is made from one piece of wood. This means it will expand and contract depending on the moisture levels. You will notice this more across the width of your boards.
Engineered hardwood has multiple layers, meaning it can be more dimensionally stable.
However, it will still need expansion space.
Floating engineered flooring is very sensitive to any issues, as the joined surface needs to be able to move.
Your installation can affect how you plan your expansion gaps.
Read our article about hardwood installation methods to learn more.
How Expansion Gaps Work at Doorways and Transitions
One of the most obvious places you need to consider expansion gaps is around doorways.
Homeowners will typically want a clean transition without any extra raised trims or awkward joins.
Depending on how your rooms join, you will need to consider your options.
Using Transition Strips Between Rooms
Transition trims can give you a neat transition between your flooring. For example, T-molding can be used where two surfaces join at a similar height.
This will cover your expansion gap whilst still leaving the correct amount of space underneath.
However, you should not attach your transition so it pins your floating floor in place.
Ensure you are following the manufacturer’s instructions for attaching.
Hardwood Flooring Around Door Frames
Door casings and jambs can make it difficult to get a neat expansion gap.
Rather than cutting your hardwood tight to the visible edge of your door frame, your installers may cut underneath your casing. This will give you a neater look whilst still allowing your flooring to expand.
Ensure you are cutting underneath with enough space for your flooring system to expand.
Can Hardwood Run Continuously Through Doorways?
Sometimes having seamless flooring can give a nicer look to your home. Especially if the rooms you are joining have the same flooring.
Depending on your product and installation, you may be able to.
A nailed-down solid hardwood floor may have different layout requirements than a floating engineered floor. The room size, plank direction, and number of joined areas can also affect this.
Before removing your transition, ensure your flooring manufacturer allows a seamless layout.
Expansion Gaps in Large Rooms and Open Floor Plans
Large living rooms and open plans can cause additional considerations.
The larger your flooring, the more important it is to consider overall expansion and any limitations.
Why Large Rooms Need Special Attention
Imagine you have a large living room, dining area, and hallway all covered in hardwood flooring.
Whilst you may have fewer walls interrupting your installation, your flooring will still react to changes in humidity.
Long runs of flooring may need extra consideration, especially if it’s a floating system.
Some flooring systems will have maximum sizes they can be installed in before you need to add an extra expansion joint or transition.
This will depend on your product.
Some engineered hardwood brands may have different layout requirements than others.
Planning Expansion Space Across Long Flooring Runs
Installers will need to consider how long and wide your flooring is. This may mean adding extra transition points, changing your layout, or following specific requirements for larger installs. You should also consider where your doors, kitchen islands, fireplaces, and other fixed items are.
By planning this out before installation, you will avoid having any obvious changes after your flooring has been installed.
Open-Concept Homes and Wide-Plank Hardwood
Wide plank flooring can give a dramatic look to large areas of your home.
However, wider solid wood boards can cause more dimensional movement across each plank. This means it is important to manage moisture, acclimatization, and installation.
Do not try to plan your expansion gaps based on the look.
Ensure the product you are using is suitable for the room size and internal conditions.
How Installers Hide Expansion Gaps
Sometimes homeowners worry they will have visible gaps around their new flooring. However, in most cases, your gaps will be hidden.
Baseboards and Quarter-Round Trim
Skirtings are commonly used to hide the gap between your flooring and walls.
If you are keeping your existing skirtings, suitable quarter-round or shoe molding can be used. Ensure this is attached to the correct fixed surface and not through your floating floor.
The aim is to hide your gap without stopping the natural movement.
Thresholds and Transition Profiles
Thresholds can hide expansion joints between separate flooring areas. There are different thresholds available for flooring that are the same height, slightly different heights or transitioning between hardwood and another flooring.
Ensure your threshold is suitable for your finished floor and will give the correct amount of expansion. A well-planned transition can look intentional.
What Happens When Expansion Gaps Are Too Small?
Sometimes you may not notice any issues straight away. However, once the humidity in your home changes, your floor may start to show issues.
Hardwood Flooring Buckling
Buckling can occur when your flooring lifts from your subfloor.
This can happen if your boards are struggling to expand due to too much pressure. However, moisture issues and other installation factors can cause this. One reason this can happen is a lack of an expansion gap around the edges.
Before repairing, investigate why your flooring is buckling. Simply trimming your flooring may not solve any moisture issues.
Pressure Between Hardwood Boards
Pressure can build up between your boards if they are expanding against fixed items. Depending on your flooring system, this can cause warping, bulging, and pressure on your joints.
This can be an issue if your flooring was installed tight to a wall or obstruction.
Problems With Floating Hardwood Floors
Floating flooring needs to be able to move as designed by the manufacturer. If your flooring is being pinned by heavy built-ins, poorly attached trim, or other fixed items, it can cause the flooring to lift or separate in those areas. Even if you have the correct amount of expansion gap around the edges, an obstruction elsewhere can cause issues.
Installers will need to consider how your floor is laid out.
Can Expansion Gaps Be Too Large?
Sometimes more is not better. If you have too much expansion gap, this can be visible past your skirtings or thresholds. This can cause issues fitting your flooring neatly around doorways, cabinets and other features.
Measure how much expansion you need and ensure your trims will hide it. If your room has uneven walls, your installers may need to be careful with their cuts to ensure they have the correct amount of expansion. Do not fill large gaps with a firm material to hide any installation errors.
Ensure whatever you use to fill or finish your flooring will work with your flooring’s movement.
How Colorado’s Climate Affects Hardwood Expansion
Colorado’s relatively dry climate can cause some interesting issues with your hardwood flooring.
During low humidity, your hardwood can lose moisture, causing it to contract. This can cause small gaps between your individual boards. During other times, your wood can expand due to increased humidity or unexpected exposure to moisture.
This does not mean you cannot install hardwood flooring in your Colorado home. However, you should choose, condition, and install your flooring with the local environment in mind. Keeping your indoor temperature and humidity within the levels recommended by your flooring manufacturer will also help limit extreme changes.
Expansion gaps are just one aspect of this.
Professional Hardwood Flooring Installation in Colorado
Installing hardwood flooring is not as simple as choosing a color and direction for your planks. Every property has different layouts, flooring, and design requirements.
An older property in Denver may have uneven walls and unusual transitions around your doorways. Whereas a newer luxury property may have large open-plan rooms, wide planks, and bespoke features.
2nd Gen Hardwood offers luxury residential flooring projects across Denver and surrounding Front Range communities.
By carefully planning your flooring, you will have a finished product that complements your home and accounts for the natural movement of your hardwood.
What Should Be Checked Before Installation?
Before starting your installation, your contractor should consider:
-
Perimeter Gap – Ensure you are leaving the correct amount of expansion gap around your walls.
-
Doorways – Decide if you need transitions or expansion joints.
-
Fixed Items – Plan your expansion gap around pillars, hearths, cabinets, etc.
-
Room Size – Check with your manufacturer if you can have seamless flooring within certain sizes.
-
Flooring – Consider the different requirements for solid, engineered, and floating flooring.
-
Moisture – Ensure your hardwood and subfloor meet the requirements.
-
Trims – Choose suitable skirtings and thresholds to hide your gaps.
By considering these issues, you will avoid unnecessary changes once your flooring is installed.
Final Thoughts
Although your expansion gaps may be hidden once installed, they play an important role in your flooring’s lifespan. They give your wood space to expand and contract with changes in moisture levels without putting pressure on your walls, doorways, or fixed items.
The amount of expansion you need to leave will depend on your flooring, installation, and the size of your space.
Pay extra attention to larger rooms and open-plan spaces.
By planning your hardwood floor expansion gaps, you will avoid any unnecessary issues during installation, and your finished flooring will look as intended.
If you are looking to install your hardwood flooring in Denver or surrounding Front Range areas, get in touch with 2nd Gen Hardwood to discuss your project.